Navy Paisley Welding Cap

Name: Navy Paisley Welding Cap
Brand: HD Welding Hats
Price: 23.99 USD
Availability: OutOfStock

Write a review

| Ask a question

$23.99 Sold out

"Hi Roxanne, Yes, we received our order and your hats are perfect! Thank you so much for checking in and for making such beautiful hats! " Lorraine M in Alaska

Lorraine M

Verified buyer

Custom Measurments, Thread Colors or Liner Choice:

If you need a custom measurement for size (nearest 1/8"), depth (nearest 1/4") or brim (nearest 1/4") let me know. Please be specific. If you would like certain color for embroidery fill that in here as well.

Unfortunately, this item is sold-out!

Details

Customize and purchase the Navy Paisley welding cap. Made in the USA from 100% preshrunk cotton, reversible and hand made to your order.

This welding cap will most often be lined with one of the solid color cotton shown below. You are free to request a lining color of your choice using the text box above. This option is limited to stock on hand at the time your order is made.

Navy

Green

Hunter Green

Features

100% preshrunk cotton fabric.
Fully lined with a solid color cotton fabric. Every welding cap is reversible.
6 panel crown section with full brim.
Brim uses 14 oz FR denim for strength, flexibility and durability.
Double rows of stitching at all stress points/areas.

Measurents & Embroidery Details

Choose the size closest to your measurement. Custom sizes are available.
Depth is measured from the top center of skull toward the ear. Custom depth is available to the nearest 1/4".
Brim Length is from edge of cap (where the band meets the brim) to edge of brim forward at the center.
Embroidery (no sweatband required) and decorative stitching (cotton sweatband required) is done on the band and/or brim.
Decorative stitching cannot be done with microfiber sweatband.

Wash with like colors in warm or hot water.
Tumble or hang dry. Hang dry is recommended.
Starch can be used on the brim for added spark deflection.
Dryer sheets are not recommended.
Chlorine Bleach white only cotton welding caps
Color Safe, non chlorine bleach is safe for for all caps, including decorative stitching and embroidery.

All welding caps are guaranteed for fit and quality. Replacements for same product (if available) are free. No restocking fee. I will send a prepaid shipping label via email if needed. Refunds and replacements within 30 days of receipt.

No Compromises
In Quality
100% Satisfaction
Guarantee
Free Shipping
Over $50

HD Welding Hats Size, Depth, Brim diagram

Still have questions regarding your correct size? Please contact us

How to Measure for Size, Depth and Brim Length

Hat Size Measurements:

7 - 22 1/8"
7 1/8 - 22 1/2"
7 1/4 - 23"
7 3/8 - 23 3/8"
7 1/2 - 23 3/4"
7 5/8 - 24"
7 3/4 - 24 1/4"
7 7/8 - 25

The measurements above are the exact finished measurement of the band at the time the hat is complete. As with most cotton fabrics there is some stretch, and it does vary from on fabric to another.

If you are between sizes use the size closest to your actual measurement.

If you prefer, I am happy to provide custom measurements to the nearest 1/8th inch for size (and 1/4" for depth and brim as explained below).

Size, Depth & Brim Measuring Information

Hat Depth Measurements:

In the past depth has been labeled 'high crown' or 'low crown'. I don't do that, you have more choices here at HD Welding Hats, so you and I are now referring to it as 'depth'. The meaning is the same, how far down the hat pulls at the ear. It's a matter of skull size and personal preference - everyone is different and has their own personal preference, and now you have more choices.

6" depth is the shortest cap I make and is measured from TDC to the bottom edge of the band at the ear. You need to ask for this measurement in the text box and is not available on Pipeliner Fancy caps, welding caps with sweatbands.

6 1/2" would be considered the "short crown" and often fits to the top edge of the ear. Again, everyone is different it may not fit you that way.

7" is very popular - mid way between the short and high crown. Again, from TDC of the cap to the bottom edge of the band at the ear.

7 1/2" would be the 'high crown" and meant to cover the top half of the ear. This is a generalization and may not fit you that way.

8" is the newest offering and typically needed for clients that have a hat size 7 5/8 and larger. You are always free to choose what you need. There's no right or wrong answer.

Brim Length Measurements:

2" - this is the shortest available. Order this if you wear a smaller size, have a shorter than average neck or don't need the brim in your way.

2 1/2" - this has been my standard brim length for decades. It works for nearly everyone. Order this if you aren't sure.

3" - this is popular, and provides good coverage of ear and neck without being in the way.

Here's the difference -

You know not all welding caps are the same.

FR Denim

All medium and dark color welding caps have FR Denim in the brim at no extra charge. With the brim most likley to be exposed to head and sparks the FR Denim helps your cap last longer and protect you even better.

Learn more

Coming Soon!

Soon you will be able to have Kevlar thread used in the brim and bottom edge of the band! Added strength, heat resistance and fire resistantce sparks will be on the loosing side - making our welding cap last longer.

Custom Measurements

Because every welding cap is custom made to your order standard measurements and custom measurements for the perfect fit and function are never a problem.

Learn more

Selection

With all the standard sizes, custom sizes, depth and brim length options I also carry nearly 300 different fabric color/prints and Bundle Options for your new welding caps.

View All