Oogie Jack Welding Cap

Hat Size Measurements:

• 7 - 22 1/8" 
•  7 1/8 - 22 1/2" 
•  7 1/4 - 23" 
•  7 3/8 - 23 3/8"
• 7 1/2 - 23 3/4" 
•  7 5/8 - 24" 
•  7 3/4 - 24 1/4" 
•  7 7/8 - 25

The measurements above are the exact finished measurement of the band at the time the hat is complete. As with most cotton fabrics there is some stretch, and it does vary from on fabric to another. 

If you are between sizes use the size closest to your actual measurement. 

If you prefer, I am happy to provide custom measurements to the nearest 1/8th inch for size (and 1/4" for depth and brim as explained below).

Hat Depth Measurements:

In the past depth has been labeled 'high crown' or 'low crown'. I don't do that, you have more choices here at HD Welding Hats, so you and I are now referring to it as 'depth'. The meaning is the same, how far down the hat pulls at the ear. It's a matter of skull size and personal preference - everyone is different and has their own personal preference, and now you have more choices.

6" depth is the shortest cap I make and is measured from TDC to the bottom edge of the band at the ear. You need to ask for this measurement in the text box and is not available on Pipeliner Fancy caps, welding caps with sweatbands.

6 1/2" would be considered the "short crown" and often fits to the top edge of the ear. Again, everyone is different it may not fit you that way.

7" is very popular - mid way between the short and high crown. Again, from TDC of the cap to the bottom edge of the band at the ear.

7 1/2" would be the 'high crown" and meant to cover the top half of the ear. This i